EH44

EH44
  • CAS No.:1879076-81-9

Important Notice

  1. This product is a chemical product/pharmaceutical intermediate. It is not a drug, an active pharmaceutical ingredient (API), or a pharmaceutical-grade material. It has not been granted a drug approval number or a Chemical Drug Substance Approval Notice, has not passed drug-related review and approval, and is not manufactured, tested, or released in accordance with pharmaceutical GMP.
  2. This product is intended solely for non-clinical research, process development, quality studies, further chemical processing, or chemical synthesis. It must not be used in drug-product manufacturing, clinical trials, clinical diagnosis, or administration to humans or animals, or be sold, used as an input, submitted for regulatory filing, or released as an API or pharmaceutical material.
  3. The purchaser must not use this product, or supply it to another party, for personal consumption, sports or fitness, weight loss, health supplements, food, or animal feed.
Other grades of this product :
EH44 Basic information
Product Name:EH44
Synonyms:EH44
CAS:1879076-81-9
MF:C48H51N3O4
MW:733.94
EINECS:
Product Categories:
Mol File:1879076-81-9.mol
EH44 Chemical Properties
Safety Information
MSDS Information
EH44 Usage And Synthesis
UsesEH44 is a Li+ free, hydrophobic hole transporting material (HTM). It eliminates degradation due to Li+ migration, supresses degradation due to moisture absorption and thus showed promise for achieving long-term stability in fabricated perovskite solar cells. Using EH44 as HTM in a device configuration of: SnO2/PAL/EH44/MoOx /Al, not only generated high power conversion efficiency (PCE) comparable to the record PCE by using the state-of-the-art-HTM Spiro-OMeTAD, but also most importantly showed greatly improved device stability: even under the combined stresses of light (including ultraviolet light), oxygen and moisture, perovskite solar cells using EH44 as hole transporting layer were shown to retain 94% of their peak efficiency despite 1,000 hours of continuous unencapsulated operation in ambient air conditions (relative humidity of 10-20%). When stability tests were conducted in an inert atmosphere, degradation of only ~2% over the course of 1,500 hours of continuous operation was observed.Note that in the above mentioned result, silver bis(trifluoromethanesulfonyl)imide (product 668001) was used to oxidize EH44 and yield EH44+TFSI?.EH44+TFSI? was then blended with neat EH44 at various ratios to control the conductivity (and optical transparency if desired) and optimize the device performance. The impressive power conversion efficiency (PCE) of 18.5% was achieved for a perovskite solar cell using EH44 layers of ~60 nm thickness doped with 14wt% EH44+TFSI? and 25 mg/ml 4-tert-butylpyridine (product 142379), which is comparable to device performance using spiro-OMeTAD (19%) as the HTM.
General DescriptionEH44 is a carbazole derivative used as interfacial, hole transporting and contact layer in perovskite solar cell (PSC). Using EH44 can increase the performance and the lifetime of the devices. EH44 is a Li+ free, hydrophobic hole transporting material (HTM) which can eliminate degradation due to Li+ migration, supresse degradation due to moisture absorption and has long-term stability in fabricated PSC.
EH44 Preparation Products And Raw materials

Welcome!

Please leave a message for us or use the following ways to contact us, we will reply to you as soon as possible, and provide you with the most sincere service, thank you.

  • NO. 18 ,Wujiang Road, Wulidian Street, Jiangbei District, Chongqing
  • +86-23-6139-8061 +86-13650506873
  • danny@chemdad.com sales@chemdad.com
  • www.chemdad.com
  • WhatsApp +86-13650506873

Name

phone

company

email

message

Read the full Disclaimer
Payment methods
Google translate: 日本语日本语 한국어한국어 FrançaisFrançais DeutschDeutsch EspañaEspaña TürkiyeTürkiye