Other grades of this product :
| Product Name: | 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane | | Synonyms: | 1,1-Bis(3-aMino-4-hydroxyphenyl)-2,2,2-trifluoro-1-(trifluoroMethyl)ethane;2,2-Bis(3-aMino-4-hydroxylphenyl)hexafluoropropane(6FAP);2-aMino-4-[2-(3-aMino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropan-2-yl]phenol;4,4'-(Perfluoropropane-2,2-diyl)bis(2-aMinophenol);2,2-Bis(3-amino-4-hydroxyphenyl)hexafluopropane;2,2-Bis(3-amino-4-hydroxyphenyl)-hexafluoropropane(Bis-AP-AF/6FAP);BIS-AP-AF;4,4'-(HEXAFLUOROISOPROPYLIDENE)BIS(2-AMINOPHENOL) | | CAS: | 83558-87-6 | | MF: | C15H12F6N2O2 | | MW: | 366.26 | | EINECS: | 617-475-0 | | Product Categories: | fine chemicals, specialty chemicals, intermediates, electronic chemical, organic synthesis, Organic Building Blocks;Bisphenol AF type Compounds (for High-Performance Polymer Research);Functional Materials;Reagent for High-Performance Polymer Research;Amino Alcohols;Organic Building Blocks;Oxygen Compounds;fine chemicals, specialty chemicals, intermediates, electronic chemical, organic synthesis, functional materials | | Mol File: | 83558-87-6.mol |
| 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane Chemical Properties |
| Hazard Codes | Xi | | Risk Statements | 36/37/38 | | Safety Statements | 26-36 | | WGK Germany | 3 | | Hazard Note | Irritant | | HS Code | 29222990 |
| 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane Usage And Synthesis |
| Description | 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane (6FAP) is white
crystal. Its boiling point and density are expected to be 411.3±45.0 °C and 1.545±0.06 g/cm3, respectively. It is slightly soluble in DMSO and methanol.The product is non-toxic and can be stored at room temperature
away from light and air. | | Synthesis | 30 g two (3-nitro-4-hydroxyphenyl) hexafluoropropanes are dropped into
the 1000 mL autoclave, add 300 g DMF and 1.5 g palladium/carbon (the
mass fraction of palladium in the palladium/carbon is 5%), press
hydrogen to 1MPa, open stirring and be warmed up to 70 ℃, stop reaction
after two (3-nitro-4-hydroxyphenyl) hexafluoropropane content＜0.1%,
target product two (3-amino-4-hydroxyphenyl) hexafluoropropane
Fluoropropane gas phase content is 98%, and the system is black, and the
temperature of the still is lowered to room temperature, filtered, and
the filtrate is de-dried under reduced pressure at 70-80°C to obtain
bis(3-amino-4-hydroxyphenyl) hexafluoropropane crude product , the crude
product is recrystallized, the recrystallization solvent is water and
DMF, and the mass ratio of
bis(3-amino-4-hydroxyphenyl)hexafluoropropane, water and DMF is 1:4:2. First, the bis(3-nitro-4-hydroxyphenyl) hexafluoropropane crude product
is mixed with the recrystallization solvent to increase the still
temperature to 60 °C and stir, and then the still temperature is reduced
to 10-20 °C for crystallization, filtered, After drying, 25.4 g of pure
bis(3-nitro-4-hydroxyphenyl)hexafluoropropane was obtained. The yield
of bis(3-amino-4-hydroxyphenyl)hexafluoropropane was 98.3% and the
purity was 99.6%. 1H-NMR (400MHz, D6-DMSO) δ (ppm): 4.64 (s, 4H), 6.42 (d, 2H), 7.57 (s, 2H), 6.65 (d, 2H), 9.36 (s, 2H). 19F-NMR (400MHz, D6-DMSO) δ (ppm): -62.78. [1]. | | Physical properties | White powder | | Uses | 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane（BisAPAF） is a polyimide monomer.It is mairly used in the aynthesis of the heat resisting polymers,especially in the manufacture of specialty polymeoric electronic material-fluorinated polyimides. | | General Description | 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane, also referred to as 4,4′-(1,1,1,3,3,3-hexafluoro-2,2-propanediyl)bis(2-aminophenol), is an aromatic diamine. |
| 2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane Preparation Products And Raw materials |
|
日本语
한국어
Français
Deutsch
España
Türkiye