Other grades of this product :
| 1,2,4-Benzenetriamine dihydrochloride Basic information | | Uses Synthesis |
| Product Name: | 1,2,4-Benzenetriamine dihydrochloride | | Synonyms: | 1,2,4-Benzenetriamine 2HCL;1,2,4-TRIAMINOBENZENE 2HCL;1,2,4-Benzenetriamine dihydrochloride, pract., 99%;benzene-1,2,4-triyltriamine dihydrochloride;1,2,4-Benzenetriamine dihydrochloride,99%,pract.;Benzene-1,2,4-triaMine 2HCl;benzene-1,2,4-triaMine dihydrochloride;1,2,4-BENZENETRIAMINE DIHYDROCHLORIDE PRACT., 99% (TITR.) | | CAS: | 615-47-4 | | MF: | C6H10ClN3 | | MW: | 159.62 | | EINECS: | 210-428-1 | | Product Categories: | Furans ,Coumarins;Anilines, Aromatic Amines and Nitro Compounds;Benzene derivates | | Mol File: | 615-47-4.mol |
| 1,2,4-Benzenetriamine dihydrochloride Chemical Properties |
| Hazard Codes | Xn | | Risk Statements | 20/21/22 | | Safety Statements | 36/37 | | RTECS | DC1953000 | | TSCA | Yes | | HS Code | 29215900 |
| 1,2,4-Benzenetriamine dihydrochloride Usage And Synthesis |
| Uses | 1,2,4-Triaminobenzene Dihydrochloride is a useful reagent for making multicolor fluorescent carbon dots that can be detected via white-light-emitting diodes and water. | | Synthesis | (1) Using m-dichlorobenzene as raw material, dropwise addition at low temperature and high temperature nitration in a mixed acid system of concentrated sulfuric acid and fuming nitric acid to obtain 1,3-dichloro-4,6-dinitrobenzene; (2) 1 ,3-Dichloro-4,6-dinitrobenzene is placed in a high-pressure reactor in the presence of ammonia water, and the temperature is raised to 145～150 ℃ for ammonolysis reaction to obtain 4,6-dinitro-1,3-benzenediol Amine; (3) Place 4,6-dinitro-1,3-phenylenediamine, oxygen-free distilled water and palladium-carbon catalyst in a hydrogenation autoclave, and catalyze it under a hydrogen atmosphere of 1-1.5MPa and 85°C After the hydrogenation reaction, the catalyst was removed by hot filtration under nitrogen protection to obtain a 1,2,4-triaminobenzene hydrochloric acid solution;(4) take the 1,2,4,5-tetraaminobenzene obtained in step (3) The solution was added with concentrated hydrochloric acid, cooled to room temperature, filtered under nitrogen protection, and the filter cake was dried in a vacuum desiccator at 40°C to obtain 1,2,4-triaminobenzene hydrochloric acid. The molar ratio of m-dichlorobenzene to fuming nitric acid described in the step (1) is 2.2:1, the mass ratio of concentrated sulfuric acid to fuming nitric acid is 3:8～10, and the dropping temperature is -5～0°C, The nitration temperature is 100-104°C. The reaction time of the ammonolysis described in step (2) is 3.5～4h, and the molar ratio of 1,3-dichloro-4,6-dinitrobenzene to ammonia water is 1:(10～14). The oxygen-free distilled water described in step (3) is distilled water purified by nitrogen, and the reaction time of catalytic hydrogenation is 3-4h; 4,6-dinitro-1,3-phenylenediamine, palladium-carbon catalyst and oxygen-free The mass ratio of the three distilled water is 1:0.05:10. The volume ratio of the 1,2,4-triaminobenzene hydrochloric acid solution described in step (4) to concentrated hydrochloric acid is 1:0.2-0.3. | | Description | 1,2,4-Triaminobenzene hydrochloride is an aromatic triamine with a relatively simple structure. Compared with triaminopyridine, it is easier to synthesize and realize industrialization. To a certain extent, it can replace TAP and 2,5-dihydroxyterephthalene. Formic acid (DHTA) for polymerization. | | Chemical Properties | PURPLE POWDER | | Uses | 1,2,4-triaminobenzene hydrochloride can be used as a co-doping reagent, aconitic acid-based fluorescent carbon nanomaterials with high quantum yield can be prepared, and controll the emission wavelength. |
| 1,2,4-Benzenetriamine dihydrochloride Preparation Products And Raw materials |
|
日本语
한국어
Français
Deutsch
España
Türkiye