Other grades of this product :
| 2-Iodobutane Basic information |
| Product Name: | 2-Iodobutane | | Synonyms: | 2-IODOBUTANE;2-Butyl Iodide;2-Butyliodide;2-Iodbutan;S-BUTYL IODIDE;SEC-BUTYL IODIDE;Reaxys ID: 5916384;2-IODOBUTANE, 99%2-IODOBUTANE, 99%2-IODOBUTANE, 99%2-IODOBUTANE, 99% | | CAS: | 513-48-4 | | MF: | C4H9I | | MW: | 184.02 | | EINECS: | 208-163-1 | | Product Categories: | Organics;Iodine Compounds | | Mol File: | 513-48-4.mol |
| 2-Iodobutane Chemical Properties |
| Melting point | -104 °C (lit.) | | Boiling point | 119-120 °C (lit.) | | density | 1.598 g/mL at 25 °C (lit.) | | refractive index | n20/D 1.499(lit.) | | Fp | 75 °F | | storage temp. | Flammables area | | solubility | alcohol: soluble(lit.) | | form | clear liquid | | color | Colorless to Red to Green | | Water Solubility | Insoluble in water. Soluble in alcohol and diethyl ether. | | Sensitive | Light Sensitive | | Merck | 14,1574 | | BRN | 1718777 | | Stability: | Stable. Flammable. Incompatible with strong oxidizing agents. Light sensitive. | | CAS DataBase Reference | 513-48-4(CAS DataBase Reference) | | NIST Chemistry Reference | Butane, 2-iodo-(513-48-4) | | EPA Substance Registry System | Butane, 2-iodo- (513-48-4) |
| Hazard Codes | Xi,F | | Risk Statements | 10-36/37/38 | | Safety Statements | 26-36 | | RIDADR | UN 2390 3/PG 2 | | WGK Germany | 3 | | RTECS | EK4410000 | | F | 8 | | Hazard Note | Irritant/Flammable/Light Sensitive | | TSCA | Yes | | HazardClass | 3 | | PackingGroup | II | | HS Code | 29033080 |
| 2-Iodobutane Usage And Synthesis |
| Chemical Properties | liquid | | Uses | It is used as a solvent organic synthesis and as pharmaceutical intermediate. | | General Description | 2-iodobutane is a colorless liquid. Less dense than water. Vapors heavier than air. Used to make other chemicals and as a solvent. | | Air & Water Reactions | Highly flammable. Slightly soluble in water. | | Reactivity Profile | Halogenated aliphatic compounds, such as 2-Iodobutane, are moderately or very reactive. Reactivity generally decreases with increased degree of substitution of halogen for hydrogen atoms. Low molecular weight haloalkanes are highly flammable and can react with some metals to form dangerous products. Materials in this group are incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides. | | Health Hazard | May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. | | Fire Hazard | HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | | Purification Methods | Purify the iodide by shaking with conc H2SO4, then washing it with water, aqueous Na2SO3 and again with water. Dry (MgSO4) and distil. Alternatively, pass it through a column of activated alumina before distillation, or treat with bromine, followed by extraction of the free halogen with aqueous Na2S2O3, thoroughly washing with water, drying and distilling. It is stored over silver powder and distilled before use. [Beilstein 1 IV 272.] |
| 2-Iodobutane Preparation Products And Raw materials |
|
日本语
한국어
Français
Deutsch
España
Türkiye