CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester

CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester
  • CAS No.:917342-29-1
Other grades of this product :
CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester Basic information
Uses
Product Name:CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester
Synonyms:trans-4-(Boc-amino)cyclohexaneethanol;CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester;trans-1-(Boc-aMino)-4-(2-hydroxyethyl)cyclohexane, 97%;N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl esterCarbaMic acid;trans-2-[4-[(tert-Butoxycarbonyl)amino]cyclohexyl]ethanol;trans 2-{1-[4-(N-(tert-butoxycarbonyl))-amino]-cyclohexyl}ethanol;trans 2-{1-[4-(N-(tert-butoxycarbonyl))-amino]-cyclohexyl}et...
CAS:917342-29-1
MF:C13H25NO3
MW:243.34
EINECS:
Product Categories:
Mol File:917342-29-1.mol
CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester Chemical Properties
Boiling point 366.0±11.0 °C(Predicted)
density 1.03±0.1 g/cm3(Predicted)
storage temp. Sealed in dry,Room Temperature
pka12.56±0.40(Predicted)
Safety Information
MSDS Information
CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester Usage And Synthesis
Usestrans-1-(Boc-amino)-4-(2-hydroxyethyl)cyclohexane can be used for preparing quinolinones and analogs for treating multi-drug resistant bacterial infections. It can also be used for preparing the antipsychotic drug Cariprazine.
Usestrans-1-(Boc-amino)-4-(2-hydroxyethyl)cyclohexane can be used for preparing quinolinones and analogs for treating multi-drug resistant bacterial infections. It can also be used for preparing the antipsychotic drug Cariprazine.
Application(trans-4-Hydroxymethylcyclohexyl)carbamic Acid tert-Butyl Ester is used to prepare C-2 hydroxyethyl imidazopyrrolo pyridines as JAK1 inhibitors. It is also used to prepare Mer kinase inhibitors for treatment of pediatric acute lymphoblastic leukemia.
SynthesisAn 500 ml four-necked flask is charged with 40 g (0,18 mol) of trans 2-[1-(4-amino]- cyclohexyl)-acetic acid ethyl ester hydrochloride and 160 ml of dichloromethane. To the resulting suspension 18,2 g (0,18 mol) of triethylamine is added. The reaction mixture is cooled to a temperature between 8-10°C and a solution of 40,0 g (0,185 mol) of di(tert-butyl)dicarbonate in 100 ml of dichloromethane is added for 1 hour with stirring under nitrogen. Then the reaction mixture is allowed to warm to a temperature between 22-25°C and stirred until the reaction proceeds. After completion of the reaction 100 g of 5% aqueous sodium carbonate is added and the phases are separated. The organic layer is extracted with 50 ml of water and after separation the organic layer is dried under Na2SO4 and the filtrate is concentrated in vacuum. The trans 2-{1-[4-(N-tert-butoxycarbonyl)-amino]-cyclohexyl}-acetic acid ethyl ester obtained is dissolved in 460 ml of tetrahydrofurane then 13,68 g (0,36 mol) of sodium borohydride is added at 25°C under nitrogen. With stirring, to the reaction mixture a solution of 24,0 g (0,18 mol) of aluminium chloride in 250 ml abs. tetrahydrofurane is added dropwise at a temperature between 18-22°C for 1 hour under nitrogen then the mixture is stirred for additional 2 hours. After completion of the reaction the mixture is cooled to a temperature between 5-10°C and 650 ml of water and 600 ml of toluene are added. Then the pH was adjusted to 3-4 by adding 40-45 ml of concentrated hydrochloric acid and the stirring was continued at a temperature between 20-25°C for 1 hour. The phases are separated, the aqueous layer is extracted with 50 ml of toluene and the combined organic layers are washed with 3×150 ml of water and dried in vacuum. In this manner 41,1 g of title compound was obtained. Yield: 94% 20. Melting point: 101-103°C.
CarbaMic acid, N-[trans-4-(2-hydroxyethyl)cyclohexyl]-, 1,1-diMethylethyl ester Preparation Products And Raw materials

Welcome!

Please leave a message for us or use the following ways to contact us, we will reply to you as soon as possible, and provide you with the most sincere service, thank you.

  • NO. 18 ,Wujiang Road, Wulidian Street, Jiangbei District, Chongqing
  • +86-23-6139-8061 +86-13650506873
  • danny@chemdad.com sales@chemdad.com
  • www.chemdad.com
  • WhatsApp +86-13650506873

Name

phone

company

email

message

Payment methods
Google translate: 日本语日本语 한국어한국어 FrançaisFrançais DeutschDeutsch EspañaEspaña TürkiyeTürkiye